locate error

[kentn]

hi i have a problem with en tiger console and some futurelight phs 575 and phw 575. the light are working just fine, but if i use the locate button in the ml menu, the start running som kind of internal program. to realease them again i have to reset the fixture. if i put the personality file in the builder program and check the channel settings to locate, it seems to be right.
any ideas?

[kentn]

hi i have a problem with en tiger console and some futurelight phs 575 and phw 575. the light are working just fine, but if i use the locate button in the ml menu, the start running som kind of internal program. to realease them again i have to reset the fixture. if i put the personality file in the builder program and check the channel settings to locate, it seems to be right.
any ideas?

is there really not anyone having any idea to this problem. +

[niclights]

I can't see anything wrong either. My best guess is there's something different about the fixture. I wondered if perhaps the fixture is set to 8-bit mode, although according to the manual that should simply disable the 'fine' channels.

[Olie]

Try patching as dimmers and setting the dimmer channels to the locate state. This might give you a clue as to what is going on. Sounds like a light problem so you may want to speak to the manufacturer.