i only can swop in run mode

[tailwip]

Hello.
I have two probleme with my pearl expert
I use titan V2.
In run mode i can only use the softey as a kill fonction.
The flash and swop button have the same fonction: kill

Is it normal?

(moderation note: removed cross-post)

Thank very much.
Sorry for my english:)

[niclights]

I removed your second problem to avoid confusion since, as you pointed out, you have already posted it in a more appropriate topic.

I'm not sure what you mean by 'softkey as a kill function'.

In the key profile 'run' the blue buttons are swop (solo) and the grey buttons are flash.
There is a bug in v2.0 where, if the grey key for fixtures is defined as 'flash' and there is nothing stored on the associated handle (ie. a palette) then instead of flashing it mimics the action associated with the blue key (swop in this case).

The easiest solution is to store a palette under the fixture. This is fixed in the next version.

Note that with key profiles you can customise what the blue and grey keys do.

[tailwip]

Thank for your reponse.
This probleme alsow come with the fixtures and dimmer when I work on run mode.
I have no probleme with the playback.

Last week i have done a show with only traditionnal dimmer. I have do my playback and parameter how the buttons work. But in the show i can't only flash directly a channel: the swop and flash work in kill mode.

Thank and sorry for my poor english:)

[niclights]

As I said, there is a bug with grey button on fixtures.

Store a palette underneath and flash will work correctly on grey button in run mode.

Swop works correctly on blue button.