tiger doesn't work!

Questions or discussions about the Titan and classic consoles and software.

Moderator: Moderators

nrdgnr
Posts: 21
Joined: 26 Feb 2009, 14:58

tiger doesn't work!

Postby nrdgnr » 14 Aug 2009, 21:07

hi!

i've just open my console (pearl tiger) , screen has contunious waving but nothing happen.. nothing on internal display ... show is starting in 1 hour and i don't know what i have suppose to do....
User avatar
niclights
The eManual
Posts: 4461
Joined: 24 Sep 2004, 01:06
Location: UK

Postby niclights » 14 Aug 2009, 22:38

This is already probably too late. There is a 24hr emergency support number. Hopefully it's this one:
+44 (0)7831 17 8888

Otherwise, open it up and check all connections is best advice I can give.
nrdgnr
Posts: 21
Joined: 26 Feb 2009, 14:58

Postby nrdgnr » 16 Aug 2009, 16:07

hi again!

we found pearl expert on repair time for broken pearl tiger but i have one question ;

on pearl tiger ; the key is run mode and desk is working takeover run mode , when i push the swop button on playbacks, movinglights are taking position without dimmer channels and i'm fading up for dimmer channels.. (cue) , but i can't working like this on pearl expert.i'm pushing swop button but nothing happen... there is some settings about this??

thanks
User avatar
niclights
The eManual
Posts: 4461
Joined: 24 Sep 2004, 01:06
Location: UK

Postby niclights » 16 Aug 2009, 18:20

I did not know you could preload with swop.

One solution is to lower flash master to zero and use grey playback button.
nrdgnr
Posts: 21
Joined: 26 Feb 2009, 14:58

Postby nrdgnr » 18 Aug 2009, 03:39

Hmm thanks for solution but this is long way then other.. there is no way to using preload with swop button?? pearl tiger has this function but expert doesn't , why? :?:

Who is online

Users browsing this forum: No registered users and 22 guests