Offset moving head pan and create new devices

[robinjacobsson]

Hi,

I am new to Avolites and Titan and have some questions that I hope you can help me with.

My Algam MS60 moving heads are pointing 45 degrees panned wrong. Is there an offset-function to make them point in the same direction as the Visualiser?

I can not find the MW19x15ZX, or I can read the "MW19x15Z" but it does not take the correct arguments so I guess that is an old version.
Is there a way to create a new device, or how would you recommend me to solve it?

[niclights]

You can adjust the orientation of fixtures in the Capture Visualiser by selecting them, toggling the wheel mode to visualiser and selecting the pan bank. This will connect the wheels to various parameters relating to the selected Capture fixtures such as position, orientation and rotation where selecting the pan bank will cycle through different pages of controls.

Normally you would orientate the fixture to match the real world using the fixture display as a reference point (typically represented as a rectangle on one side of the base of moving heads.

Sadly manufacturer's rarely document the calibration. If the pan/tilt calibration does not match the real-world and you would like it to be updated please submit a request via the form on the personality website explaining this in the notes section. We can then send you a document with instructions on how to determine the calibration for Capture.

If you require a new fixture adding to the library you can use the same form.