Fxtures removed from cue only cues may not get "Cue Released"

[revenant]

Titan Go V16

Fixtures removed from a cue only cue within a cue list with Cue Release enabled may not be released.

Repro as follows -

1. Start new show
   
2. Patch 4 x Clay Paky Arolla Spot MP 29 DMX
   
3. Create a 2 cue list
   
   
   • Cue 1 - containing fixtures 1 THRO 4 with Magenta at 100% all other attributes default
     
   • Cue 2 - containing fixtures 1 THRO 3 with Magenta at 100% all other attributes default
     
   
   
4. <Exit> <Clear>
   
5. <Open/View> {PLAYBACK 1} and set tracking of both cues to [Cue Only]
   
6. Set PLAYBACK 1 Options -> Release -> Cue Release to Enabled/On
   
7. Set <Clear> option [Clear Selected Fixtures On]
   
8. Remove fixture 1 from Cue 2
   
   
   1. <Include> {PLAYBACK 1} 2 <Enter>
      
   2. 1 <Enter> <Clear>
      
   3. <Record> <Cue> 2 [Replace]
      
   
   
9. 1 <THRU> 4 [Locate] <Clear> (provides a state to "Release" to)
   
10. <Go> twice on {PLAYBACK 1} to assert Cue 2
    
11. Observe, magenta on fixture 1 remains at 100% showing fixture is not released even though fixture 1 is no longer present in Cue 2

Note - This issue depends on two conditions

1. Tracking method is changed to [Cue Only] after being recorded rather than being originally recorded as Cue Only
   
2. Fixtures are removed via the [Clear Selected Fixtures On] method
   

Workaround - After removing fixtures, copy the cue and delete the original

1. Connect to Cue List
   
2. <Copy> <Cue> 2 <Enter> <Enter>
   
3. <Delete> <Cue> 2 <Enter> <Enter>