Smoke machine with RGB LED (SF-A002)

Welcome to the Avolites Personality Builder Forum.

Moderator: Moderators

Phrenetyk
Posts: 2
Joined: 26 Jul 2019, 19:13

Smoke machine with RGB LED (SF-A002)

Postby Phrenetyk » 30 Jul 2019, 13:31

Hi everyone,
I'm new at forum and writing because have been asked to add two chinese smoke machines with 24 x 3w RGB LEDs to an installation with a Quartz. I don't know how to create a personality with posibilities to handle the color mix , dimmer, etc. as normal RGB light because all LEDs are handle with a single channel ...

The machine is this:
http://www.51sinfen.com/en/?show-10-1.html

The mapping that brings the "manual":
Channel 1 -> Smoke -> 000-255 -> Smoke 0-100%
Channel 2 -> Reserve
Channel 3 -> LEDs -> 000 -> Off
001-010 -> Auto color change (R / G / B)
011-020 -> Blue
021-030 -> Red
031-040 -> Green
041-050 -> Blue Strobe
051-060 -> Red Strobe
061-070 -> Green Strobe
071-080 -> Blue Fade
081-090 -> Red Fade
091-100 -> Green Fade
101-110 -> Color fade (R / G / B)
111-255 -> Auto color change (R / G / B)
Channel 4 -> Speed ​​-> 000-255 -> Speed ​​0-100%

Any help will be welcome.
Thanks to all, regards.
User avatar
niclights
The eManual
Posts: 4206
Joined: 24 Sep 2004, 01:06
Location: UK

Re: Smoke machine with RGB LED (SF-A002)

Postby niclights » 30 Jul 2019, 13:47

According to the specs on the linked product page it has 7 channels. But if the mapping in the manual is correct then unfortunately it will not be possible to have dimmer or colour mixing. I would create this as 1 - dimmer (representing the smoke control), 2 - reserved, 3 - colour macro, 4 - speed.

Who is online

Users browsing this forum: No registered users and 1 guest