Hello,
I would like to know how to pause a movement (or any other) shape at a moment, leaving the fixtures lit at certain position with beam, color, etc..., and restart from that position?
I know it is possible in Titan but I don't figure out how to make it. I have Titan Mobile (v10). Anyone can help me?
Stop / pause a pan/tilt shape and restart from that point
Moderator: Moderators
Re: Stop / pause a pan/tilt shape and restart from that point
Some options:
- Create an idential shape with speed at zero. Firing this shape will pause the main shape in its current position and killing will cause it to continue from where it left off.
- Put the shape in a cuelist with fader set to control speed (using the cuelist will allow the shape to be stopped with the fader fully lowered without killing the shape).
- Assign a rate master on a fader set to 100% scale. Fully lower the fader to pause the shape, fully raise to continue where it left off.
- Create an idential shape with speed at zero. Firing this shape will pause the main shape in its current position and killing will cause it to continue from where it left off.
- Put the shape in a cuelist with fader set to control speed (using the cuelist will allow the shape to be stopped with the fader fully lowered without killing the shape).
- Assign a rate master on a fader set to 100% scale. Fully lower the fader to pause the shape, fully raise to continue where it left off.
Who is online
Users browsing this forum: No registered users and 26 guests