Hello everybody,
since I update my Pearl Expert and my Titan Mobile to Version 5, I have the following Problem:
When I set a Fade Time for a Playback, I can´t use the Flash Button. When I rise the Fader, the Cue fade in programmed Time to Target Position. When I use the Flash Button, the Fade Time will be ignored - the Beam´s snap to Target Position without fading. When I release the Button befor the Time is over, the Beam´s snap back a bit.
Means: Fade Time 4 sec. --> bush Flash Button Beam´s snap to Target --> release the Button after 2 sec. , the Beam´s snap back to 50 %
To anyone else have this Problem
GR, Elli
Flash Problem with Titan V5
Moderator: Moderators
- john rogers
- Posts: 97
- Joined: 18 May 2010, 12:29
- Location: London
- Contact:
There are two workarounds in the meantime. One is to make a 2 step cuelist, step 1 @ 100; step 2 @ 0% with a fade out time on step 2.
The other way is to set the grey key to latch, then press once for full and a second time for your fade out.
As Nick says we're aware of this.
The other way is to set the grey key to latch, then press once for full and a second time for your fade out.
As Nick says we're aware of this.
Used to work at Avo. Freelance now.
-
- Posts: 77
- Joined: 18 Jan 2011, 12:11
Hi,
I've having problems changing the blue executors to flash in version 5. In the show file they were set to a flash key profile. After the update to V5 they became latch (even with the same key profile). I tried editing the key profile and remaking all the buttons flash, but it still latches. I also tried a brand new key profile with every key set to flash, but it still latches. Is this a common problem? I have not tried with a fresh show file... but I need it in this show file.
I've having problems changing the blue executors to flash in version 5. In the show file they were set to a flash key profile. After the update to V5 they became latch (even with the same key profile). I tried editing the key profile and remaking all the buttons flash, but it still latches. I also tried a brand new key profile with every key set to flash, but it still latches. Is this a common problem? I have not tried with a fresh show file... but I need it in this show file.
-
- Posts: 117
- Joined: 25 Jul 2011, 00:45
-
- Posts: 77
- Joined: 18 Jan 2011, 12:11
-
- Posts: 1089
- Joined: 02 Jul 2010, 10:29
- Location: Siegen, Germany
- Contact:
Who is online
Users browsing this forum: No registered users and 80 guests