eDMX from Diamond 4 via Wifi

JPalmer · Postby **JPalmer** » 27 May 2009, 21:43

Hi,
I am trying to set up my eDMX tubes to receive data from the console by way of the Wireless Access Point, but when I look at the Wendi it says that the console is not broadcasting DMX.
The WAP and the tube are working. I can use a laptop or the D4 computer to send signal to the eDMX tube via the WAP, but there is no data coming from the D4.
I have enable the eDMX to send DMX and I have added a eDMX node to universe 9 and set it up.
Is there something not in the manual that I am missing? Has anyone had success in setting this up to work without using an encoder tube?
Thanks,
John D. Palmer
Lighting Specialist
Cerritos Center for the Performing Arts
john_palmer(at)ci(dot)cerritos(dot)ca(dot)us

JPalmer · Postby **JPalmer** » 28 May 2009, 01:10

Further information...
In the WendiHouse application if I right click on the desk encoder and attempt to view DMX, it tells me that the desk is not encoding.
Is there some sort of network software driver that the D4 software needs to send the eDMX information to the network adapter? Is there a Wendi setting that needs to be setup and how?
Thanks,
John