Hello, i already ask but without picture last time.
How can i "Touch" my attribute in programmer to get the current color in active "blue", to record this in palette. (current color)
Like that :
I already have all the step of my macro in coded macro but that section is from the avolites macro ( but is'nt as effiency as i want ) (already have the merge part too)
Thank for your time and your help
Is this possible (coded macro)
Moderator: Moderators
Re: Touch Attribute
If the fixtures are already selected and the correct attribute bank is selected you could do something like this:
A more reliable way for certain attributes would be to use the attribute ID:
It would be helpful to others to provide more description in the subject in case they have a similar question.
Code: Select all
Programmer.Editor.Fixtures.SetContextAttributeFromWheelIndex(1)
Programmer.Editor.Fixtures.TouchSelectedControls()
A more reliable way for certain attributes would be to use the attribute ID:
Code: Select all
Programmer.Editor.Fixtures.SetContextAttributeFromId(112)
Programmer.Editor.Fixtures.TouchSelectedControls()
It would be helpful to others to provide more description in the subject in case they have a similar question.
Re: Is this possible (coded macro)
Thanks Gregory, i'll upload this with details after finish
Both way work but the 2e wont with Rgb fixture or fixture without (color1)
So i'm using the first way, but there is another issue. it NEED to be "color" in the programmer, (bad english so i'll screen this )
I cant find a way to step on color before the line, is this a way ?
I know why but cound solve this, i need a step to do this :////
thank a lot for your time
Both way work but the 2e wont with Rgb fixture or fixture without (color1)
So i'm using the first way, but there is another issue. it NEED to be "color" in the programmer, (bad english so i'll screen this )
I cant find a way to step on color before the line, is this a way ?
I know why but cound solve this, i need a step to do this :////
thank a lot for your time
- sideshowbond
- Posts: 182
- Joined: 18 Nov 2016, 20:58
Re: Is this possible (coded macro)
You need to set the ContextAttribute right.
I have read out a recorded macro once and use
which works just fine.
1=Intensity, 2=Position, 4=Colour, 8=Gobo, 16=Beam, 32=Effect, 64=Special, 128=Shapes
I have read out a recorded macro once and use
Code: Select all
Menu.InjectInput("OnSelect","AttributeGroup","NoGroup",1)
which works just fine.
1=Intensity, 2=Position, 4=Colour, 8=Gobo, 16=Beam, 32=Effect, 64=Special, 128=Shapes
Who is online
Users browsing this forum: No registered users and 16 guests