Hi guys,
Can someone tell me the best way doing a rig etc to scale on visualliser.
I load up my blank inches theatre file and then want to put up two forty foot trusses or whatever. I cant gauge the scale of the whole thing without a grid in place or something. Any idea's. tips or tricks?
Any suggestions appreciatted.
Ta!
Working to scale.
Moderator: Moderators
Re: Working to scale.
Pheamer wrote:I cant gauge the scale of the whole thing without a grid in place or something.
Sounds like your not using real life dimensions in theatre properties and /or real life dimensions for object properties.
Just in case you're not doing this...
In design mode, right click INSIDE the theatre walls to open theatre proprieties and set some realistic dimensions. If you are using a blankinches theatre then, obviously the units are in inches.
To add a 40' truss (open new truss properties) - set the dimensions before selecting 'add one'.
Again, if units are in inches, a 40' truss will require a width of 480. Be sure to set the SIZE W, D and H i.e. the 3rd row down.
If you use real dimensions, then the displayed scale will be correct.
HTH
Andy
"It's the prospect of hearing something that you could never have dreamed existed"
John Peel
www.iadwm.com
John Peel
www.iadwm.com
Working to Scale
Thanks guys, that helps a lot.
Ph.
Ph.
Who is online
Users browsing this forum: No registered users and 18 guests