Only one visualiser universe on PC?
Posted: 15 Dec 2020, 19:29
Re Titan V14.0 on TT2, desktop and laptop (latter two with Editor AvoKey).
On TT2, visualiser works fine on all universes.
On desktop/laptop universe 1 works fine. Other universes:
1. Show selection of fixtures.
2. Do not allow control of fixtures.
3. Do not produce light, unless they were on when show last saved on console (see no. 4 below).
4. Maintain the DMX values from when I last saved show on console, although this is not reflected in DMX view.
So the situation is that the editing at home, I'm missing U2 and U3, and Any U2/3 fixtures that were still on when I saved the show on the console are stuck on with no way of turning them off.
Repatching doesn't help. Creating a new test show with one dimmer on each universe is the same as above.
I'm sure none of this was a problem before I upgraded from V11.4 last weekend.
Hopefully someone will be kind enough to put me out of my misery and enlighten me as to weather it's just me, or it's whether it's a design feature!
Cheers in advance,
Andy
On TT2, visualiser works fine on all universes.
On desktop/laptop universe 1 works fine. Other universes:
1. Show selection of fixtures.
2. Do not allow control of fixtures.
3. Do not produce light, unless they were on when show last saved on console (see no. 4 below).
4. Maintain the DMX values from when I last saved show on console, although this is not reflected in DMX view.
So the situation is that the editing at home, I'm missing U2 and U3, and Any U2/3 fixtures that were still on when I saved the show on the console are stuck on with no way of turning them off.
Repatching doesn't help. Creating a new test show with one dimmer on each universe is the same as above.
I'm sure none of this was a problem before I upgraded from V11.4 last weekend.
Hopefully someone will be kind enough to put me out of my misery and enlighten me as to weather it's just me, or it's whether it's a design feature!
Cheers in advance,
Andy