Communications Issue

Welcome to the Avolites Visualiser Discussion Forum.

Moderator: Moderators

Pearce Hire
Posts: 9
Joined: 17 Feb 2005, 15:57

Communications Issue

Postby Pearce Hire » 17 Feb 2005, 16:03

Hi All,

I'm new to visualiser, I have a Pearl 2004 connected to my PC directly using the Visualiser port on the back of the Pearl. I also have a dongle installed which is working.

I tried loading the demo theatre into visualiser and the console, I set visualiser to run and selected RS-232, I have also set the console MIDI setting to Visualiser in user settings.

I have also tried building my own theatre but again it doesn't talk to desk....what am I doing wrong!!

John Huson
Pearce Hire
Pearce Hire
Posts: 9
Joined: 17 Feb 2005, 15:57

Postby Pearce Hire » 17 Feb 2005, 16:42

OK, cracked it! It would appear that the Visualiser port on one of our Pearl 2004's doesn't work!

Tried another one it's fine!
User avatar
iadwm
Posts: 184
Joined: 15 Sep 2004, 16:24
Location: Southend on Sea, UK
Contact:

Postby iadwm » 17 Feb 2005, 19:49

Hi John,

Just out of curiosity, did you assume that your first Pearl was at fault or do you know for sure (by having run the MIDI tests)?

I had similar problems and both desk and PC were OK, but I still had to use ACDI to get them to talk.

If you haven't seen it, the document below is quite useful...

http://www.avolitesdownload.com/Downloa ... dcheck.doc


Regards,

Andy

Who is online

Users browsing this forum: No registered users and 1 guest