Page 1 of 1

Using Cache Builder

Posted: 08 Jan 2008, 06:07
by kappadragon
I used Cache Builder to create a disk unique to the space that the board will be used in, but the console could not read the disk.

The console is an Avo Pearl 2008.

Posted: 08 Jan 2008, 10:33
by Olie
Most likely a fault with the disk. The console is very temperamental about which disks it can use. Often a disk will work on the PC but not in the console. Try using a different disk.

It sometimes helps to format the disk in the console.