Hi,
I have a Quartz with avokey and I would like to use Prism Zero to get video via NDI and use it on the pixelmapper for some lighting fixtures. Do I need a separate avokey inserted in the pc for Ai?
Can’t find a clear answer to it.
Thanks!
Prism Zero + Quartz
Moderator: Moderators
-
- Posts: 1090
- Joined: 02 Jul 2010, 10:29
- Location: Siegen, Germany
- Contact:
Re: Prism Zero + Quartz
Yes, you will need an AvoKey in order to run Prism. A standard Editor AvoKey is what you'll need.
Re: Prism Zero + Quartz
Okey thank you!
But Prism dosen’t work for an NDI live feed on to the pixelmapper right? It’s only for play videos within Prism on to a screen and send via NDI to the console and on to the pixelmapper?
I would like to send my output from a Barco scaler via NDI to the pixelmapper. I’m getting a feeling it’s only possible to achieve that with the AI application and a higher license?
But Prism dosen’t work for an NDI live feed on to the pixelmapper right? It’s only for play videos within Prism on to a screen and send via NDI to the console and on to the pixelmapper?
I would like to send my output from a Barco scaler via NDI to the pixelmapper. I’m getting a feeling it’s only possible to achieve that with the AI application and a higher license?
-
- Posts: 1090
- Joined: 02 Jul 2010, 10:29
- Location: Siegen, Germany
- Contact:
Re: Prism Zero + Quartz
You can use Ai (the big one) in demo mode which requires only a standard AvoKey for this. As far as i know the demo watermark doesn't show in NDI and Synergy (pixelmap connection). This is my current test setup: Titan v15 and Ai v12 on one computer, licenced by one T1 (I am using Titan Simulator to get the number of universes). I have patched 800 RGB fixtures for this, giving a matrix of 50 x 8.
Who is online
Users browsing this forum: No registered users and 20 guests