Replacing a palette with one of the default type does not take
Posted: 18 May 2023, 10:53
Arena V16
When replacing a palette with one of the default type the palette type remains unchanged.
Repro as follows -
1. Start new show
2. Patch 4 x Clay Paky Axcor Spot 400 (28 DMX)
3. Create a normal beam palette with Zoom for 4 x Axcor Spots at 25%
4. Select 4 x Axcor Spots and set Zoom attribute to 35%
5. <Record> <Palette> {Palette 1} [Replace]
6. Note - Palette type indicator remains showing 'N' only
7. <Open/View> {Palette 1}
8. Observe, palette contains normal data only despite palette type option being 'Global' during record/replace operation.
In order for the palette to be replaced by one of the default type as expected, the palette type option has to be cycled i.e. step 5 would currently need to be -
5. <Record> <Palette> <C> <C> <C> {Palette 1} [Replace]
When replacing a palette with one of the default type the palette type remains unchanged.
Repro as follows -
1. Start new show
2. Patch 4 x Clay Paky Axcor Spot 400 (28 DMX)
3. Create a normal beam palette with Zoom for 4 x Axcor Spots at 25%
4. Select 4 x Axcor Spots and set Zoom attribute to 35%
5. <Record> <Palette> {Palette 1} [Replace]
6. Note - Palette type indicator remains showing 'N' only
7. <Open/View> {Palette 1}
8. Observe, palette contains normal data only despite palette type option being 'Global' during record/replace operation.
In order for the palette to be replaced by one of the default type as expected, the palette type option has to be cycled i.e. step 5 would currently need to be -
5. <Record> <Palette> <C> <C> <C> {Palette 1} [Replace]