The Avolites Discussion Forum

I can't take shows of my venue in a few days later.
I decided to make simplifying my show to ten fader console and some newbie will take the show.
So I trying to add DMX triggers from the simple console to my T2.
I connected the console to T2's DMX A and tried to add trigger.
But I got nothing signal from the console?
I confirmed the console working with a fixture and T2 is right.
I thought T2 could take DMX input, couldn't it?
I don't use T2's DMX A and B for output but sacn with a DMX node.

Hi Kim, as already answered in Facebook: yes, the T2 does take DMX input as well. Have you selected the correct Dmx Port as input in the trigger menu?

Yes, but still doesn't work.

kimwida wrote:Yes, but still doesn't work.

You will have to change the mode from USB Expert Console from TX to RX

nt2ds wrote:You will have to change the mode from USB Expert Console from TX to RX geometry dash world

Thanks. I will try.