Page 1 of 1
Pearl 2010 Wheels (scale) Value Not Work
Posted: 21 Aug 2022, 20:33
by sertveac
hi
I've been facing a problem like the one in the video for a while.
Does anyone know how to solve the problem and can help ?
https://www.youtube.com/shorts/63u-AOvoTXE 
Re: Pearl 2010 Wheels (scale) Value Not Work
Posted: 22 Aug 2022, 09:59
by niclights
Perhaps something has become disconnected inside? If you haven't done so already I would open it up and check/reseat all of the connections.
Re: Pearl 2010 Wheels (scale) Value Not Work
Posted: 23 Aug 2022, 17:35
by sertveac
niclights wrote:Perhaps something has become disconnected inside? If you haven't done so already I would open it up and check/reseat all of the connections.
I did what you said before but I couldn't find the solution
Is there a way to be sure if it is due to firmware or hardware?
Regards
Re: Pearl 2010 Wheels (scale) Value Not Work
Posted: 24 Aug 2022, 14:27
by niclights
It's a long time now since I last used a Classic console but you should be able to go to System -> [Service] -> [Diagnostic Screen]. This should change the LCD display to show readings from the various hardware buttons, faders and wheels (Whl1/ Whl2). If these don't respond when turning the wheel then almost certainly it is hardware.