Pearl 2010 Wheels (scale) Value Not Work

Questions or discussions about the Titan and classic consoles and software.

Moderator: Moderators

sertveac
Posts: 2
Joined: 21 Aug 2022, 20:09

Pearl 2010 Wheels (scale) Value Not Work

Postby sertveac » 21 Aug 2022, 20:33

hi
I've been facing a problem like the one in the video for a while. :cry: :?
Does anyone know how to solve the problem and can help ? :oops:
https://www.youtube.com/shorts/63u-AOvoTXE :|
User avatar
niclights
The eManual
Posts: 4442
Joined: 24 Sep 2004, 01:06
Location: UK

Re: Pearl 2010 Wheels (scale) Value Not Work

Postby niclights » 22 Aug 2022, 09:59

Perhaps something has become disconnected inside? If you haven't done so already I would open it up and check/reseat all of the connections.
sertveac
Posts: 2
Joined: 21 Aug 2022, 20:09

Re: Pearl 2010 Wheels (scale) Value Not Work

Postby sertveac » 23 Aug 2022, 17:35

niclights wrote:Perhaps something has become disconnected inside? If you haven't done so already I would open it up and check/reseat all of the connections.

I did what you said before but I couldn't find the solution
Is there a way to be sure if it is due to firmware or hardware?
Regards
User avatar
niclights
The eManual
Posts: 4442
Joined: 24 Sep 2004, 01:06
Location: UK

Re: Pearl 2010 Wheels (scale) Value Not Work

Postby niclights » 24 Aug 2022, 14:27

It's a long time now since I last used a Classic console but you should be able to go to System -> [Service] -> [Diagnostic Screen]. This should change the LCD display to show readings from the various hardware buttons, faders and wheels (Whl1/ Whl2). If these don't respond when turning the wheel then almost certainly it is hardware.

Who is online

Users browsing this forum: Bing [Bot] and 37 guests