LED Fixture power on values
Posted: 23 Jun 2022, 20:21
I have some Chauvet Nexus 4 x 4 RGB panels and as patched, by default, when I select a fixture and turn up the dimmer, they light up white R=100% B=100% G=100%. I would like there to be no colour until I select it. I have some hex pars which I think did the same thing and as far as I can see, I have modified the personality so the power on values are 0% for the colours.
I'm not sure if this is how I fixed it, but those hex pars do not light up when I just increase the dimmer.
I have modified the Nexus personality to have power on colours at zero and I can see the saved personality alongside the hex par version but the colours still come on.
Does anyone know if this is how I should do it and why it is not working?
Basicly I would like the colour values to be at zero until I change them.
I'm not sure if this is how I fixed it, but those hex pars do not light up when I just increase the dimmer.
I have modified the Nexus personality to have power on colours at zero and I can see the saved personality alongside the hex par version but the colours still come on.
Does anyone know if this is how I should do it and why it is not working?
Basicly I would like the colour values to be at zero until I change them.