By example, if I have an attribute in a personality with two conditions like:
Code: Select all
Condition 1:
Function id=1 range=0~100 WheelPos=0
Function id=2 range=0~100 WheelPos=1
Condition 2:
Function id=3 range=0~100 WheelPos=0
Function id=4 range=0~100 WheelPos=1
If condition 2 is true and function 4 has value of 25, if then condition 1 becomes true I would like function 2 to get value 25 but for now it gets value 0.
I have a fixture that has two prism channels that set rotate or index mode for each and one channel that sets rotate or index value for both. I would like to choose the prism with one attribute and have rotate or index keep the value when I change prism but for now the rotate and index values get reset when the prism changes.
I hope that's clear, my friend who helps with technical translations is not available.
By actual example, the personality I have can be downloaded here High End Systems_SolaSpot ATU.d4. If you choose 3 Facet prism and set a CCW rotate value of 85, then choose 4 Facet prism you'll see the rotate value gets reset to 1 but I would like it stay at 85.
To be clear about the personality file, it is written for touring needs, many fixture features might not be added, it is not compatible with factory personalities, it needs a minimum version of Titan to work, I don't know what that minimum version is, what ever version added 32bit DMX channels is the minimum, I'm using V15 and it works fine.