Fixture inladen in Pearl 2004 via USB

Questions or discussions about the Titan and classic consoles and software.

Moderator: Moderators

markcapo
Posts: 3
Joined: 26 Sep 2021, 15:13

Fixture inladen in Pearl 2004 via USB

Postby markcapo » 26 Sep 2021, 15:19

Goede middag,

Wij hebben een 2e hands pearl 2004 gekocht nu willen wij daar fixtures inladen. Deze heb ik gedownload van de Avolites site uitgepakt en op een usb stick gezet. Volgens de handleiding de tafel in system gezet en dan utilities en shapefiles dan zegt de tafel dat de stick niet gelezen kan worden wie kan mij hiermee helpen?
User avatar
niclights
The eManual
Posts: 4442
Joined: 24 Sep 2004, 01:06
Location: UK

Re: Fixture inladen in Pearl 2004 via USB

Postby niclights » 26 Sep 2021, 16:20

Does the console have a BUM board fitted? Or has the floppy drive been replaced with Usb? This will almost certainly be significant. It might be helpful if you are able to provide photos showing the front, top, rear and inside.
markcapo
Posts: 3
Joined: 26 Sep 2021, 15:13

Re: Fixture inladen in Pearl 2004 via USB

Postby markcapo » 26 Sep 2021, 17:15

Beste Niclights

bedankt voor je reactie,

De diskette is vervangen voor een USB poort dat weet ik een BUM boord zegt mij niets.

Hierbij de link naar de foto`s : https://photos.app.goo.gl/XqZTrBaYidmZTXBU6
User avatar
niclights
The eManual
Posts: 4442
Joined: 24 Sep 2004, 01:06
Location: UK

Re: Fixture inladen in Pearl 2004 via USB

Postby niclights » 26 Sep 2021, 17:59

Thank you. As far as I am aware the Usb floppy replacement is not an official Avolites part. My understanding is the BUM board is required in order to run the 2008 software which adds official Usb support.

I don't have any experience with the floppy replacement. However, there are some topics that might be helpful. Here are two I found:

http://forum.avolites.com/viewtopic.php?f=3&t=1667

http://forum.avolites.com/viewtopic.php?f=3&t=5908

It is important that the files are in the expected folder structure. Additionally, some of these posts appear to suggest that the Usb sticks need to be formatted in a particular way and that there may be a maximum stick size.

If this doesn't help perhaps it is possible to ask the person you purchased the console from for assistance?
markcapo
Posts: 3
Joined: 26 Sep 2021, 15:13

Re: Fixture inladen in Pearl 2004 via USB

Postby markcapo » 28 Sep 2021, 21:35

Goede avond

ik kom er niet uit hij blijft een fout melding geven het sg.dat bestand dowlnload hij van de site SAPPRL.LST niet wie kan mij verder helpen hierin ?

Who is online

Users browsing this forum: No registered users and 39 guests