Default home position

Questions or discussions about the Titan and classic consoles and software.

Moderator: Moderators

JoshVDH
Posts: 1
Joined: 27 Aug 2021, 17:39

Default home position

Postby JoshVDH » 21 Sep 2021, 11:35

Is there a way to change the default home position for lighting fixtures?

I'm not talking about changing the 'locate' position.

I want to change the default values that a particular fixture returns to after its cleared out if the programmer.. for instance, after clearing an LED fixture from the programmer, the dimmer channel will fade to '0' but the RGB values will all fade to '100'
User avatar
niclights
The eManual
Posts: 4442
Joined: 24 Sep 2004, 01:06
Location: UK

Re: Default home position

Postby niclights » 21 Sep 2021, 11:52

There is a toggle option to release to playback values (accessed via User Settings -> Clear or by holding Clear -> [Clear Options]). This is disabled by default. When enabled all the attributes will return to the last playback value for those attributes (or the default defined in the personality if there are none).
User avatar
Gregory
Posts: 1300
Joined: 14 Dec 2007, 15:25
Location: London, United Kingdom
Contact:

Re: Default home position

Postby Gregory » 26 Sep 2021, 18:21

It is also possible to change the release/home value for fixtures in a show by pressing Record then Release. This can be on individual fixtures or all fixtures of the same type.

Who is online

Users browsing this forum: No registered users and 30 guests