Hello, here is my problem:
A lighting designer came to program the console. The console was left on overnight for humidity. The next day after welcoming another lighting designer and after having saved his show, I relaunched the previous show (my show of the day before)
And that's where I had the following problem: all my lights with a shutter no longer worked.
The tilt, the pan everything works but impossible to turn them on with the intensity / dimmer. The traditional lights on dimmer and or led without shutter worked without problem.
The console clearly indicated that the shutter and the dimmer were open and at 100%
Master group 100% and no master intensity either
I had to recreate a new show.
which means that there is a parameter or mask on the shutter which starts when the console is reset or when a show is loaded
If someone has an idea ?
Thks
Problem : shutter bug after loading show
Moderator: Moderators
Re: Problem : shutter bug after loading show
No changes were made on the fixtures itself like channel mode (for fine pan/tilt), dmx adresses, etc.?
You did really make shure that the shutter was open in the console (programmer)?
You did really make shure that the shutter was open in the console (programmer)?
Re: Problem : shutter bug after loading show
I appreciate you mentioned groups but I still wonder if the shutter part is coincidental and this is related to a group set to scale master with the scale set to zero (for example a group of the fixtures that happen to have shutter controls that was assigned to a fader, the fader set to zero and then the group moved to a group button). Do you happen to still have the show? If so I would be happy to take a look. nick <dot> morris <at> avolites <dot> com.
Who is online
Users browsing this forum: Google [Bot] and 13 guests