Clear 'freeze current values'

Questions or discussions about the Titan and classic consoles and software.

Moderator: Moderators

User avatar
TWC
Posts: 81
Joined: 24 Dec 2017, 13:54

Clear 'freeze current values'

Postby TWC » 02 Oct 2020, 16:05

hi, theres some strangeness going on with the clear mode when it's set to 'freeze current values'

when you press clear any intensities you have in the programmer are instantly snapping off and following the master release time
Avo Machine - v14
Titan Mobile + Fader Wing
Dell Optiplex 7010usff
i7, ssd, 8GB, Intel Hd4000

Capture Machine
2020 Symphony - 2020.0.53
AMD A7, ssd, 32GB, nVidia RTX3060 Eagle

Ai Media Server - 12.1
r6 + 2x Datapath DVI capture cards + Genlock module.
User avatar
phb
Posts: 111
Joined: 09 Apr 2019, 14:02
Location: Avolites, Park Royal, London
Contact:

Re: Clear 'freeze current values'

Postby phb » 02 Oct 2020, 19:16

I'm not sure I understand what you're describing? If you have the "freeze current values" clear mode set clear happens instantly and does not use the release time. The release time is only used if you change the clear mode to "release to playback values". I also couldn't find any difference to v13.0?

Please could you describe the steps you're following, what you're observing, and how that differs from what you are expecting?

Best,
Pete Bridgman :: Avolites
User avatar
TWC
Posts: 81
Joined: 24 Dec 2017, 13:54

Re: Clear 'freeze current values'

Postby TWC » 02 Oct 2020, 19:43

Perhaps it got changed in some version somewhere then. It always used to be that intensities faded out using the master release time irrespective of what mode its set to but I've just not noticed it because I don't use that clear mode too often.

Haha I'm an old dinosaur thats been using titan since day one :shock:
Avo Machine - v14
Titan Mobile + Fader Wing
Dell Optiplex 7010usff
i7, ssd, 8GB, Intel Hd4000

Capture Machine
2020 Symphony - 2020.0.53
AMD A7, ssd, 32GB, nVidia RTX3060 Eagle

Ai Media Server - 12.1
r6 + 2x Datapath DVI capture cards + Genlock module.

Who is online

Users browsing this forum: No registered users and 36 guests