Fade mode 2 , flash + swoop bug
Posted: 20 Jul 2019, 11:10
Hello
Found a bug when using fade to fader cues and holding down flash and swoop buttons. Step by step with example below:
(Spots star red, down position)
1. Store a cue (fade mode 2) with dimmer and some ltp values ( white, up position )
2. Hold flash (white, up)
3. Still hold flash, start hold swoop ( white up, all other lights turn off)
4. Still hold swoop, release flash ( lights back down, red, all other lights still off )
The problem is that the cue releases all the ltp values while still holding swoop for the cue.
Br
Urban
Found a bug when using fade to fader cues and holding down flash and swoop buttons. Step by step with example below:
(Spots star red, down position)
1. Store a cue (fade mode 2) with dimmer and some ltp values ( white, up position )
2. Hold flash (white, up)
3. Still hold flash, start hold swoop ( white up, all other lights turn off)
4. Still hold swoop, release flash ( lights back down, red, all other lights still off )
The problem is that the cue releases all the ltp values while still holding swoop for the cue.
Br
Urban