The Avolites Discussion Forum

I have two “dimmer” attributes on some of my fixtures.

Release time works fine on colour and one of the intensity dimmers (over a timed period of 2s they slowly fade back to their previous values, but the other dimmer attribute simply “snaps” back to its previous value.

this sounds like a bug I reported which is going to be fixed in the next release

It's possible that this has been fixed with the release of 11.3 (Release notes #48 "Timed release ignores HTP controls" [#77746]), assuming you are referring to what happens when a playback is unlatched (i.e. the playback is not assigned to a fader (if it is assigned to a fader, the HTP intensity values will fade out using the "Fade out" time)).

Is this issue resolved using 11.3? If not, please could you let me know:
* What fixtures you're using, in which mode
* Where the playback in question is assigned to on the console
* The steps you're following to perform the release

Thanks,

djsky wrote:I have two “dimmer” attributes on some of my fixtures.

Release time works fine on colour and one of the intensity dimmers (over a timed period of 2s they slowly fade back to their previous values, but the other dimmer attribute simply “snaps” back to its previous value.

Could you provide us with following information (previously requested by phb):

Is this issue resolved using 11.3? If not, please could you let me know:
* What fixtures you're using, in which mode
* Where the playback in question is assigned to on the console
* The steps you're following to perform the release