The Avolites Discussion Forum

does the pan tilt invert on the sim work, if it does tips for a dimwit would be appreciated.

Yes it works.

It can be accessed via this routine:

1. select the fixtures you want to invert
2. go to <PATCH> and press <PATCH UTILITIES> (softbutton F)
3. press <INVERT>
4. Select Pan & Tilt on the grey attribute buttons
5. Change with softbutton E or F the setting

The result can be viewed on the CRT monitor.

It does not work, unfortunately. Most annoying problem!

Vincent wrote:Yes it works.

It can be accessed via this routine:

1. select the fixtures you want to invert
2. go to <PATCH> and press <PATCH UTILITIES> (softbutton F)
3. press <INVERT>
4. Select Pan & Tilt on the grey attribute buttons
5. Change with softbutton E or F the setting

The result can be viewed on the CRT monitor.

But when i work with MSD not works, the fixture are with the same form, I don't apreciate any change, I have change it in MSD.