Connect Pearl 2004 Sim --> Realizzer 3D?

Questions or discussions about the Titan and classic consoles and software.

Moderator: Moderators

User avatar
MarcusDEV
Posts: 4
Joined: 13 Dec 2017, 13:33

Connect Pearl 2004 Sim --> Realizzer 3D?

Postby MarcusDEV » 19 May 2018, 21:58

So I have a pearl tiger console that I use. My goal was to be able to sit at home using the pearl 2004 simulator and Realizzer 3D to program shows.
For now, I have not found a way I can connect the simulator to the visualizer. So I wondered if any of you know about a way.
I know it's an old console, but it would have been nice if it worked :D
Snoop40
Posts: 2
Joined: 02 Feb 2018, 04:44

Re: Connect Pearl 2004 Sim --> Realizzer 3D?

Postby Snoop40 » 17 Jan 2019, 06:18

I have the same issue and i am using a Pearl Rolacue..and the visualizer
I wanted to do the same thing . design shows and create looks with out setting up my complete
show.
User avatar
Gregory
Posts: 1300
Joined: 14 Dec 2007, 15:25
Location: London, United Kingdom
Contact:

Re: Connect Pearl 2004 Sim --> Realizzer 3D?

Postby Gregory » 21 Jan 2019, 11:26

As there is no network support on the classic Pearl consoles your best option is to buy a USB DMX adaptor that is capable of reading the DMX sent by the console. Many visualisers should support receiving DMX over USB, alternatively you could consider getting a DMX Art-Net box that is capable of receiving standard DMX and converting it to Art-Net which can connect to your computer via Ethernet.

Who is online

Users browsing this forum: No registered users and 30 guests