V11 Bug : Selection Pattern Direction
Posted: 16 May 2018, 13:02
Already sent a bug report to Avo support, but maybe it's useful to put it here too.
I think I found an annoying bug with the new Selection Pattern Direction feature… it simply doesn't work. If I select my fixtures (with a linear selection) and then apply a pattern direction (for example a symmetric one) from the Odd/Even button, it is applied (I can check it by using the +1/-1 buttons, the selection is symmetric).
However if I record this on a playback with the intensity at 100%, it doesn't retain the direction ! In the Cue View the fixtures are in the original linear order. And if I apply a 50% Fixture Overlap logically it's also not symmetric but linear from left to right.
Tried with different fixtures, different show files and with simple Memory as well as Cue List. Everywhere the same problem.
I think I found an annoying bug with the new Selection Pattern Direction feature… it simply doesn't work. If I select my fixtures (with a linear selection) and then apply a pattern direction (for example a symmetric one) from the Odd/Even button, it is applied (I can check it by using the +1/-1 buttons, the selection is symmetric).
However if I record this on a playback with the intensity at 100%, it doesn't retain the direction ! In the Cue View the fixtures are in the original linear order. And if I apply a 50% Fixture Overlap logically it's also not symmetric but linear from left to right.
Tried with different fixtures, different show files and with simple Memory as well as Cue List. Everywhere the same problem.