The Avolites Discussion Forum

I have a Pearl Rolacue
After a problem with my mother board, Ii change It for a Borris4 mother Board.
Every thing is Ok exept for the internal LCD display where the picture is not in the center of the screen.
If somebody know who to center the picture in the center of the screen, thanks to transmit this information
Thanks

It sounds like your new Board (which must be a Boris 3 as there is no Boris 4!) seems to think that you have a new screen.

You can change this by setting the appropriate jumper:



On your board, there should be a jumper across the Pins alongside number 6. Removing this jumper should fix this problem.