Page 1 of 1
All of my conventional send up in my Gobo/beam pallette
Posted: 20 Mar 2017, 16:44
by Mike@MAC
I've got a demo Sapphire Touch console. For the most part it's great. I've programmed a bunch of palettes and used them once they were programmed. I walked away for about an hour then came back and hit a gobo pallette button and all of my 200 conventionals came on at full. Has anyone had this problem? I do have a warm up cue that has all of my conventional fixtures but I make sure that everything is clear when recording. It has only happened in the gobo pallette
Re: All of my conventional send up in my Gobo/beam pallette
Posted: 20 Mar 2017, 17:33
by clublights
Very odd not normal ..
i've never seen a palette change by itself.
record and see if it happens again? make sure the intensity is tuned off when you record the palette.
Re: All of my conventional send up in my Gobo/beam pallette
Posted: 20 Mar 2017, 17:37
by niclights
This will be because you have accidentally recorded inensity at full as global into one or more of the gobo palettes. Look for a lit 'I' in the IPCGBES indicators in the palettes to find out which. Turning intensity OFF in the programmer an then merging into the affected palette(s) should fix.