The Avolites Discussion Forum

Hi!

I have a problem here.
I have two rows of each 8 fixtures. Just say them as up fixtures and down fixtures.
And I have three chases.

First one is about "up fixtures" that is 60 BPM and white to black color chase.
Second one is about "down fixtures" that is 60 BPM and white to black color chase.
Third one is about all fixtures that is 60 BPM and white to black color chase.

The problem is when I push one of the playback buttons of the chases, I want to syn them regardless of button push timing.
For example.
Fire first chase. And blink up fixtures.
Fire second chase. And blink down fixtures too.
But most of time, they don't syn.
I want them look like third one.
Is there any trick that it make possible??

I'm struggling to think of a way to achieve this at the moment.

A solution might be to either have just the one chase that applies to all fixtures and then have something else that enables/disables the sets of fixtures - for example group masters if reducing intensity is suitable or higher prioirty playbacks.

If that isn't workable then perhaps setup a system where there are three cuelists, each of which autoloads one of the chases and kills the others via macros.

Or 1 cuelist with 3 cues.

Cue 1 > autoload chase 1
Cue 2 > autoload chase 2
Cue 3 > autoload chase 1 & chase 2