The Avolites Discussion Forum

Is there somewhere a step by step instructions on how to create a time coded show that will run in time with a track played on the built-in Winamp?

I can find various different posts about assigning bits here and there, but what I could do with are basic instructions from start to finish.

Was hoping there was a tutorial video, but can't find one of those, well not in English anyhow.

Hi , I am also wondering for that why till today we don't have any step by step tutorial about time code with Winamp from any official avo help ?

I will pass on your request for a tutorial or video for Timecode using Winamp. If you have any specific questions I can try to answer them here.

Gregory wrote:I will pass on your request for a tutorial or video for Timecode using Winamp. If you have any specific questions I can try to answer them here.

Hi Gregory,

Can you guide me how to send the sound from the Tiger Touch 2 to the mixing console? Do i need to use any external hardware to do it because on the rear panel of the TT i don't see any output port..

Headphone socket?

There is a green 3.5mm headphone jack socket on the back of the console to get audio out.

Gregory wrote:I will pass on your request for a tutorial or video for Timecode using Winamp. If you have any specific questions I can try to answer them here.

Hi sir , I am still waiting for a tutorial or video , searching YouTube but there nothing in English language, please refer my any or kindly email me at zahoorjury(at)gmail.com

Winamp timecode is on the list of Webinar topics however due to technical issues Webinars have been postponed for the time being.

I am currently programming a show for an upcoming tour. It is a pretty straight forward show, however the band plays to tracks and they want to have their show completely automated. They run the tracks either from an ipod or a laptop depending on the tour and they are likely going to tour with a Titan One. I am programming on a mobile. What are their options here?