The Avolites Discussion Forum

Hello,

At the moment I am messing around with TouchOSC and given the possibilities of the program it would be handy if it could be integrated with the Titan software. The problem I encountered is that I can't find an OSC command list for avolites. I am working on a layout but couldn't code it.

Online I couldn't find a solid awnser if Avolites supports OSC at all.

http://hexler.net/software/touchosc

Greetings, Lars

Unfortunately OSC is not currently supported. It might not help you but MIDI Show Control is supported.

From the version 9.0 release notes:

There is now a factory trigger mapping for MIDI Show Control (MSC). The device ID can be set via the [MIDI] option in user settings. The following MSC commands are supported.

• GO - Fire the specified Playback or Cue
• STOP - Pause the specified Playback or Cue
• RESUME - Un-Pause the specified Playback or Cue
• LOAD - Set the playback level to full.
• ALL OFF - Release all playbacks
• RESET - Same as ALL OFF
• GO OFF - Same as RESUME

The MSC device ID can be set in the users settings in the MIDI section. The console will always respond to the all call ID (7F).