Problem setting up strobe - Titan Mobile

[massy1212]

Hi,

Using the Titan Mobile desk and I'm having difficulty setting up a handle for strobe on a set of Mac250's.
I can set up a handle to change the Mac's to open gobo and colour and to strobe, but when I deactivate the handle and try to just use the Mac's normally, all the settings from the handle are still in effect.
I have to use another handle to override the previous, or clear the console.

Basically what I need is a handle that will just cause the Mac's to strobe with an open gobo, and to return to their previous settings when I'm done.

I'm still quite a novice at programming the Titan so any help would be really appreciated!

[niclights]

Try setting the release mask in playback options to include intensity, colour and gobo.

[massy1212]

Try setting the release mask in playback options to include intensity, colour and gobo.

Thanks for the reply.

I had tried that earlier, but it just caused the Macs to turn off completely after. I'll give it another look anyway.

The guy who set the desk up has set it up so the Mac's only activate under a certain handle, so if I clear the console or restart it, I always have to use this particaular handle to turn them on. There's a separate handle then to control their intensity during shows. Don't know if this is worth mentioning...