The Avolites Discussion Forum

Hi all,

I'm using the titan simulator with Light Converse for 2 weeks now with a loopback network and it always worked perfect. I didn't do any network settings in Light Converse. One day Light Converse is not connected to my loopback network anymore and I don't know why or how to solve it.
In this picture you can see "art-net 1" and "art-net 2", first after "net 1" was a IP adress from my loopback network, now it's gone...

Thanks in advance
Michiel

In Titan check that you still have the appropriate DMX outputs assigned in System > DMX Settings. Also open the settings by clicking on the cog symbol on the Art-Net heading on the left hand side and check that it is enabled and the correct adapter is selected.

For the Light Converse settings try their forum.