Hi all,
I'm using the titan simulator with Light Converse for 2 weeks now with a loopback network and it always worked perfect. I didn't do any network settings in Light Converse. One day Light Converse is not connected to my loopback network anymore and I don't know why or how to solve it.
In this picture you can see "art-net 1" and "art-net 2", first after "net 1" was a IP adress from my loopback network, now it's gone...
Thanks in advance
Michiel
Light Converse network disconnect
Moderator: Moderators
-
- Posts: 31
- Joined: 04 Oct 2015, 13:17
Re: Light Converse network disconnect
In Titan check that you still have the appropriate DMX outputs assigned in System > DMX Settings. Also open the settings by clicking on the cog symbol on the Art-Net heading on the left hand side and check that it is enabled and the correct adapter is selected.
For the Light Converse settings try their forum.
For the Light Converse settings try their forum.
Who is online
Users browsing this forum: No registered users and 79 guests