Page 1 of 1

V9 update on Pearl Expert

Posted: 15 Jul 2015, 11:55
by nishrigo
I created the bootable USB stick (Transcend 4.3 GB) with all the necessary files using the v9.0 recovery creator. But the console does not boot from the USB stick.
USB was the first boot option and HDD was the second one in BIOS. I disabled second boot option, and I got the message that BOOT DISK FAILURE.

I created the USB stick using the console to run the installer, but faced the same problem.

Please help me how to boot from the USB stick.

Re: V9 update on Pearl Expert

Posted: 15 Jul 2015, 14:01
by Gregory
Try formatting the stick and then running the recovery creator again. Some users have found that with certain sticks running Rufus first to format the stick has made it work.

Re: V9 update on Pearl Expert

Posted: 24 Aug 2015, 19:59
by jb1996
I got the same problem after I have tried several times..
some ideas?

Re: V9 update on Pearl Expert

Posted: 13 Oct 2015, 06:29
by xeonwzh6652758
I am also the same problem, always can't solve.

Re: V9 update on Pearl Expert

Posted: 12 Nov 2015, 04:30
by xeonwzh6652758
Problems may be no update the BIOS