Is it possible to change the page of the 20 executors on the top right of the TM? So that I can get a fresh bank of executors every time I go to a new page?
Thanks in advance
Changing Page of Executors
Moderator: Moderators
-
- Posts: 117
- Joined: 25 Jul 2011, 00:45
Re: Changing Page of Executors
Yes. There are some factory macros provided to do this - 'Static Playbacks Page -1/+1/0/1/2/3'.
You can assign these to handles via show library: [Open Workspace Window]/[Show Library], select Macros filter. Press Copy, Select macro (for example 'Static Playbacks +1') and select destination handle (for example executor 20). Repeat for 'Static Playbacks -1' on executor 19. You can then use [Playback Options] to toggle the handle paging for these to locked so that they are available on every static page.
You can assign these to handles via show library: [Open Workspace Window]/[Show Library], select Macros filter. Press Copy, Select macro (for example 'Static Playbacks +1') and select destination handle (for example executor 20). Repeat for 'Static Playbacks -1' on executor 19. You can then use [Playback Options] to toggle the handle paging for these to locked so that they are available on every static page.
-
- Posts: 117
- Joined: 25 Jul 2011, 00:45
Re: Changing Page of Executors
Great, thanks!
-
- Posts: 117
- Joined: 25 Jul 2011, 00:45
Re: Changing Page of Executors
Follow up, would it be possible to get more pages? Meaning, an executor page 4, 5, 6... How would I create these macros?
Thanks again, sorry for filling up the forum.
Thanks again, sorry for filling up the forum.
Re: Changing Page of Executors
You can access more pages using +/-. It is possible to create macros that go directly to other pages but it requires editing the factory macros xml file.
-
- Posts: 5
- Joined: 16 Jan 2014, 15:00
- Location: France, Clermont Ferrand
Re: Changing Page of Executors
niclights wrote:Yes. There are some factory macros provided to do this - 'Static Playbacks Page -1/+1/0/1/2/3'.
You can assign these to handles via show library: [Open Workspace Window]/[Show Library], select Macros filter. Press Copy, Select macro (for example 'Static Playbacks +1') and select destination handle (for example executor 20). Repeat for 'Static Playbacks -1' on executor 19. You can then use [Playback Options] to toggle the handle paging for these to locked so that they are available on every static page.
I,
It's possible to do this with my pearl expert?
I try to do this with the touch wing and that didn't work...
Re: Changing Page of Executors
No, sorry, currently it is not possible to page the physical handles on the Expert Touch Wing.
Who is online
Users browsing this forum: No registered users and 9 guests