shape generator chase tracking problem

[turbofex]

Hey there,
I have a tiger touch in hand and when programming it i found something strange.

what i did is as follows:

select some moving heads,give them a pan saw shape.

record a 2-step chase,step 1 color white and step 2 color red.

i did this alot on classic pearl, the lights starts moving,and i can use the wheels to set the color change speed.

but on tiger touch,when i set the crossfade to 0%,the lights just stops moving,changing color only

it feels like in titan the chase records the whole programmer every step not just the changes i made ,meaning it have no tracking function at all!

should it just record the color changes in step2 and track the movements from the previous step?

please tell me is this by design or just a mistake?and are there any chance i could get classic pearl style back again?thanks very much!

[niclights]

There is no tracking in chases. This is by design, but this is not actually relevant. The issues you see are a known limitation of shapes in chases at the moment. The best solution is to use a cuelist to autoload a shape playback and a chase playback simultaneously.