The Avolites Discussion Forum

Or at least it seems to be. I'm pre-programming and I can't do @20 for 20% intensity. Only @@ and @0 seem to work for 100% and 0% respectively.

At least this is what the Intensity display says, we'll see what happens on stage later today when I go live.

Works fine for me. Check user setting 'Channel levels set in units/Channel levels set in tens'.

With channel levels set in tens you would use @2 <enter> for 20%. @20 <enter> would give you full.

With channel levels set in units you would use @20 <enter> for 20%.

Yep, that was it. Thanks.