Page 1 of 1

Power fail when BIOS update

Posted: 30 Jan 2013, 08:52
by ErikArvidsson
Hey my friends!

Today when i started to update the BIOS in my PearlExpert the power went off in the building. When the power was back on, my desk doesn't start up. It probably doesn't have any BIOS for the motherbord. All the screens are dark and i cant do anything. Is there anyone who manage to solve this problem?
Typical my luck! :evil:

Best regards!
/Erik Arvidsson

Posted: 30 Jan 2013, 11:50
by niclights
Wow, that is incredibly unlucky! Unfortunately I suspect you will probably need a new motherboard. I suggest you contact service immediately.

I also suggest you don't stand outside in any storms...

Posted: 30 Jan 2013, 15:42
by icke_siegen
There is a slight chance you can recover BIOS with the Reset jumper, as described here: http://www.avolitesshop.co.uk/phpBB3/vi ... php?t=2217

Fingers crossed...