Hi,
I am interested in the possibility of controling the Pearl 2004 from a laptop. I am aware the console can be controlled by MIDI (and commands in the manual for this), and that the riggers remote is connected through the rs232 port...
Is it possible to just connect the console directly to a computer via a serial port and send commands to start playbacks etc - and if so, what serial commands are required?
Many thanks,
Tim
RS232 Control
Moderator: Moderators
-
- Posts: 1
- Joined: 16 Feb 2005, 18:59
- Location: Sheffield
- Contact:
Who is online
Users browsing this forum: No registered users and 65 guests