The Avolites Discussion Forum

When launching "Titan Mobile", I get a brand new error code after a little bit of programming and backing up the console -- unfortunately this error code starts after launching but before the red avolites portion of the program loads.

Cannot Execute C:\Program Files\avolites\Titan\Wendisrv.exe -d error=2


I searched the forums for a solid 45 minutes with no answers. Any Idea what the cause of my issue is or how to fix it?

Hello,

This is due to adding eDmx as a DMX output on Titan Mobile which is not supported. To resolve this, please delete the file containing the DMX settings which can be found here: "C:\Program Files\Avolites\Titan\User\DmxInterfaces.usr".


Gregory

Thank you so much -- Now I've got something to work from!

**an effort to make this forum as useful as possible

The fix that Gregory posted above did work, but I didn't delete the file. Instead, I moved the file out of the directory, launched "Titan Mobile" successfully, and found that my DMX output settings were different. (what a surprise )

After this, I moved the original DMXInterfaces.usr back into it's original place (changes took place immediately in the Titan Mobile program). I then made sure that the eDMX output was disabled and restarted the program.

Fixed! Thanks again Greg!