Martin MAC Aura and Titan V5, how-to

[frontal]

I notice that the personality file for the Martin MAC Aura must be slightly altered now.
I have moved up to a Tiger Touch now, and when I shall patch my Aura`s now, there is a selection in Titan that asks if I will separate the effect and the beam when patching.

BUT, I dont really understand how the Aura`s themselves shall be patched when wanting to patch so that the aura and the beam are separated!

Can anyone help, maybe with a tutorial on how to patch 12 Aura`s on a Tiger Touch and where the aura and the beam are separated?

Regards,
Kurt

[niclights]

To patch and use the Mac Beam and Aura parts on separate handles you must set the mode of the fixtures to EXT and patch one of the Beam part (19 DMX) to the same address as the fixture and the associated Aura part (6 DMX) immediately after (ie. fixture start address + 19).

For example, if fixture 1 is addressed at DMX 001 and fixture 2 is at DMX 0026 then Beam fixture 1 = 001, Aura fixture 1 = 020, Beam fixture 2 = 026, Aura fixture 2 = 35.

[frontal]

Thank you very much!
Sorry for the cross-posting, just got a bit carried away there