The Avolites Discussion Forum

How can I unfold multiple fixtures at once?

As for example, if I have 24 MAC Aura, and I what to set an Aura color for all 24, how I can do?

I can do it one by one, but I cannot unfold more than one fixture...

Cheers,

Unfortunately it is not possible at the moment. But the requirement is understood and hopefully there will be a solution soon.

In the meantime there are two workarounds:

1) Unfold fixture, select cells, record group. Repeat for subsequent fixtures merging groups until you have a group containing all the cells.

2) Assign the cells to handles: Open Show Library workspace or go to Disk/[Show Library]. Toggle [Show Unassigned Handles]. Toggle other options until only Fixtures are shown. Select first cell and select a destination handle. Repeat for all cells.

I prefer the latter, assigning to a separate fixture workspace page in a way that represents layout on stage (maybe not with the Aura though!). I would usually then create groups from this workspace.

Another couple of ways to select just the cells of a fixture are:

a) Numerically: selecting [x][.] will select the cells of a fixture (where x is the fixture's number).

or

b) Channel Grid: Open Channel Grid and drag to select just the cells all at once. From there you can store a group.

Hello.
With Pixeline, it is the same?.
With all devices with multiple cells?
Thank you.

Yes

When you could be arranged?
It is the library problem?, Or software version?
Thank you.

It is a software problem.

very bad this one... you need to thing about a more versatile way to control that... maybe the solution is tweack the library, and allow this from the fixture...