The Avolites Discussion Forum

Hi All,

I use a tiger for my shows.

We are working on a large show, software will start the show (music and dmx comes from the pc)
The problem is the programming from the fixtures. It is very difficult to program al the fixtures into the software.

Is it possible to program all chases / cue's / etc. into the Tiger and trigger the cue's / pallete / chases by the DMX-IN port.

Hope somebody knows.

Regards,

DMX In can only be used to capture states (via Include).

For triggering externally you can use MIDI.

Ok, thnx,

we fixed our problem.

We send with the software the MIDI signals to the pearl, this works perferct.

Regards,