Page 1 of 1

Titan V3.1 Chase direction problem...

Posted: 24 Jun 2010, 18:14
by iadwm
The bug that caused chases to stop if set to reverse or bounce:
Is this only fixed for new chases ? My Titan 3.0 (might be earlier) show is now stopping if chases are set to reverse (keep pressing reverse and it steps back a step at a time) or bounce.

It happens with both Playback Options/direction and console buttons.

This didn't happen in V3.0. Please don't tell me I've got to re-program all these chases! There are LOADS...

Andy

Posted: 24 Jun 2010, 21:29
by niclights
Nightmare.

I've partly figured out what is going wrong and was going to offer a fix, but it seems deeper than I first thought depending on what version the chases originate.

New chases work until you edit the link type.

This can definitely be fixed without reprogramming but I think it needs to be looked at officially first.

Posted: 24 Jun 2010, 22:12
by iadwm
A fix would be great. The chases are mainly HTP for a number of LED's, so the direction gets changed quite often and on the fly.
Do I need to do anything at this point (tomorrow)?

Thanks, as always for your help.

I've just thought...it's more likely to be next week...being the Glasto weekend...

Cheers,

Andy

Posted: 24 Jun 2010, 22:30
by niclights
Ok. Send me the file. I think I have a fix now.

There are two caveats:

Firstly, they will break if you edit the link type again.
Secondly, do you have any cue-lists? It complicates the fix if you do.

Posted: 24 Jun 2010, 22:58
by iadwm
Cue Lists? Work of the Devil! Lol.....

Showfile sent.

THANK YOU

Andy

Posted: 24 Jun 2010, 23:41
by niclights
Fix sent.

Posted: 25 Jun 2010, 00:09
by iadwm
Received and working !
Two fixes at once, now thats quality!

Thanks for you assistance and patience.

Andy