Page 1 of 1
gobo rotation in palet
Posted: 02 Aug 2009, 15:39
by vbarie
is it possible to program a gobo rotation whitout programming the gobo. in the titan software.
Posted: 02 Aug 2009, 16:14
by niclights
Yes. Just make sure you select record by channel mode.
Posted: 02 Aug 2009, 16:38
by vbarie
i no howe it works in the classic mode. But in titan you have tot select if you want to record in channel or in fixture mode when recording a que. But when i want to record a palete i can only select which atribute i want to program. But the gobo rotation and the gobo is on the same button.
Posted: 02 Aug 2009, 17:24
by niclights
In Classic it is always record by channel.
Which version of Titan are you using? IIRC 1.1 should have a softkey within the store palette menu to toggle record mode. I think 1.0 was done by a second press of the attribute key but this was confusing.
Posted: 04 Sep 2009, 10:02
by Marquz
I have the same problem...
It´s not woking in titan yet i think...
/M
Posted: 04 Sep 2009, 13:17
by niclights
You must ensure store palette is set to 'channel in programmer'. By default it is 'group in programmer'. To change this enter store palette menu and toggle mode with softkey E.
Posted: 04 Sep 2009, 17:33
by Olie
It is better to set the record mode to "Mixed", in V2 this will be the default mode.